September 24, 2020

F+L Webcast Episode 5 – Top 5 Auto Trends | FLD Leaderboard | 600×75
World Industrial Coatings Market, 2025 – Impact of COVID-19 on the Value Chain, Customer Analysis, and Shift in the Aerospace Industry –

DUBLIN–(BUSINESS WIRE)–The "Industrial Coatings Market by Resin (Polyurethane, Epoxy, Acrylic, Alkyd), Technology (Solvent-based, Water-based, Powder), End-Use Industry (General Industrial, Protective, Automotive, Aerospace, Wood, Packaging), and Region – Global Forecast to 2025" report has been added to's offering.

The global industrial coatings market was USD 88.9 billion in 2019 and is projected to reach USD 103.2 billion by 2025, at a CAGR of 3.9%, between 2020 and 2025.

The increasing demand for environmentally-friendly coatings, the need for efficient process and durable coatings with better aesthetics, and growing demand from the APAC region are expected to drive the industrial coatings market. However, difficulty in obtaining thin films in powder coatings and the requirement of more drying time for water-based coatings are the major restraining factors for the market.

Acrylic is projected to be the fastest growing resin chemistry during the forecast period

Acrylic resin-based industrial coatings have high demand, especially in the automotive industry, owing to stringent environmental regulations and the high corrosion resistance of these coatings. Apart from automotive, consumer appliances is the major end-use industry of these coatings. The coatings based on acrylic resins are also being used in wood, transportation, marine, and general industrial applications.

Powder-based industrial coatings are expected to be the fastest-growing technology during the forecast period

Powder-based industrial coatings are highly efficient with over 98% powder overspray recoverability, more resistant to chipping, scratching, fading, and wearing than other finishes. This process releases negligible VOC into the environment and takes less cure time beyond the cool-down period. Powder-based industrial coatings emit low levels of VOCs, providing superior performance and cost efficiency for applications that require maximum abrasion resistance, and hardness.

Increasing consumption of industrial coatings in general industrial and automotive industries is expected to fuel the demand for industrial coatings

The general industrial and automotive segments are the largest end-user industries of industrial coatings. Population growth, improved standard of living, infrastructure growth, global GDP growth, and recovery and growth in the construction industry are driving the growth of the general industries. Automotive OEM is an integral part of automotive manufacturing. Coatings offer excellent quality and durability to automotive equipment. Industrial coatings possess superior mechanical properties that protect automobiles from scratches, environment, and chemical exposure. Interior automotive coatings improve the surface area. Increasing automobile production in some parts of the world is expected to drive the demand for industrial coatings.

APAC is expected to register the highest growth during the forecast period

APAC has emerged as the leading consumer and producer of industrial coatings due to the growing manufacturing sector in all major economies of the region. Also, the presence of many large, as well as small industrial coatings producers, is driving the market in the region. The demand for industrial coatings in APAC is driven majorly by consumption in China. Other APAC countries such as Vietnam and India are also witnessing significant investments in the automotive and marine sectors to cater to the demand.

Research Coverage

The market study covers the industrial coatings market across segments. It aims at estimating the market size and the growth potential of this market, across different segments based on resin type, technology, end-use industry, and region. The study also includes an in-depth competitive analysis of the key players in the market, along with their company profiles, key observations related to product and business offerings, recent developments, and key market strategies.

Key Topics Covered

1 Introduction

2 Research Methodology

3 Executive Summary

4 Premium Insights

4.1 Attractive Opportunities in the Industrial Coatings Market

4.2 Industrial Coatings Market, by Resin Type

4.3 Industrial Coatings Market, Developed vs. Developing Countries

4.4 Industrial Coatings Market, by End-use Industry and Key Countries

4.5 Industrial Coatings Market, by Major Countries

5 Market Overview

5.1 Introduction

5.2 Market Dynamics

5.2.1 Drivers Increasing Demand for Environmentally Friendly Coatings Need for Efficient Process and Durable Coatings With Better Esthetics Growing Demand from APAC

5.2.2 Restraints Difficulty in Obtaining Thin Films in Powder Coatings Requirement of More Drying Time for Water-Based Coatings

5.2.3 Opportunities Attractive Prospects for Powder Coatings in Shipbuilding and Pipeline Sectors Increasing Use of Nano-Coatings Continuous Demand for Extended Product Lifetime and Reduced Maintenance

5.2.4 Challenges Stringent Regulatory Policies

5.3 Porter's Five Forces Analysis

6 Macroeconomic Trends and Impact of COVID-19

6.1 Macroeconomic Overview and Key Trends

6.1.1 Introduction

6.1.2 Trends and Forecast of GDP

6.1.3 Trends and Forecast of Global Automotive Industry

6.2 COVID-19 Impact

6.3 COVID-19 Economic Assessment

6.3.1 COVID-19 Economic Impact – Scenario Assessment

7 COVID-19 Impact on Industrial Coatings Market

7.1 Value Chain of the Industrial Coatings Industry

7.2 Impact on Value Chain

7.2.1 Raw Materials/Suppliers Impact of COVID-19 on Raw Materials and Suppliers Resins Pigments Solvents Additives

7.2.2 Industrial Coatings Formulators Impact of COVID-19 on Formulators

7.2.3 Applicators Impact of COVID-19 on Applicators

7.2.4 Distributors Impact of COVID-19 on Distributors

7.2.5 End-use Industries Impact of COVID-19 on End-use Industries

7.3 Customer Analysis

7.3.1 Shift in Automotive Industry

7.3.2 Impact on Customers' Output & Strategies to Resume/Improve Production Impact on Customers' Revenues Most Impacted Regions Short-Term Strategies to Manage Cost Structure and Supply Chains New Market Opportunities/Growth Opportunities Measures Taken by Customers Customers' Perspective on the Growth Outlook

7.4 Shift in Aerospace Industry

7.4.1 Disruption in the Industry

7.4.2 Impact on Customers' Output & Strategies to Resume/Improve Production

7.4.3 Impact on Customers' Revenues Most Impacted Regions Short-Term Strategies to Manage Cost Structure and Supply Chains

7.4.4 New Market Opportunities/Growth Opportunities Measures Taken by Customers Customers' Perspective on Growth Outlook

8 Industrial Coatings Market, by Resin Type

8.1 Introduction

8.2 Polyurethane

8.3 Epoxy

8.4 Acrylic

8.5 Polyester

8.6 Alkyd

8.7 Fluoropolymer

8.8 Others

9 Industrial Coatings Market, by Technology

9.1 Introduction

9.2 Solvent-Based

9.3 Water-Based

9.4 Powder

9.5 Others

10 Industrial Coatings Market, by End-use Industry

10.1 Introduction

10.2 General Industrial

10.3 Protective

10.4 Automotive OEM

10.5 Industrial Wood

10.6 Automotive Refinish

10.7 Coil

10.8 Packaging

10.9 Marine

10.10 Aerospace

10.11 Rail

11 Industrial Coatings Market, by Region

11.1 Introduction

11.2 APAC

11.3 Europe

11.4 North America

11.5 Middle East & Africa

11.6 South America

12 Competitive Landscape

12.1 Introduction

12.2 Competitive Leadership Mapping, 2019

12.2.1 Visionary Leaders

12.2.2 Innovators

12.2.3 Emerging Companies

12.2.4 Dynamic Differentiators

12.3 Market Share Analysis

12.4 Competitive Scenario

12.4.1 Investment & Expansions

12.4.2 Mergers & Acquisitions

12.4.3 New Product Launches

12.4.4 Joint Ventures

13 Company Profiles

13.1 AkzoNobel N.V.

13.2 Axalta Coating Systems, LLC

13.3 Jotun A/S

13.4 Ppg Industries Inc.

13.5 the Sherwin-Williams Company

13.6 Nippon Paint Holdings Co. Ltd.

13.7 Kansai Paint Co. Ltd.

13.8 Rpm International Inc.

13.9 Tikkurila Oyj

13.10 Hempel A/S

13.11 Other Key Players

13.11.1 Teknos Group

13.11.2 Noroo Paint & Coatings

13.11.3 Weilburger Coatings

13.11.4 The Chemours Company

For more information about this report visit


Laura Wood, Senior Press Manager
For E.S.T Office Hours Call 1-917-300-0470

For U.S./CAN Toll Free Call 1-800-526-8630

For GMT Office Hours Call +353-1-416-8900

< Previous

Phillips 66 Partners Reports Second-Quarter 2020 Financial Results

Berry Global Group, Inc. Reports Strong Third Quarter 2020 Results